"All About Cow Comfort"
Wallmaster Shutter Fan
-
Available in 36” and 50” models
-
Heavy duty 18 gauge galvanized housing
-
Galvanized X–frame motor mount provides solid motor mounting for increased motor life and quieter operation
-
Aluminum shutters with tie bar to prevent flapping and locking open
-
Poly guard clips to reduce vibration for quiet performance
-
Spring belt tensioning system reduces bounce at startup on all belt driven models
-
3, 4 or 6 blade galvanized propeller is balanced for smooth operation
Typhoon Exhaust Fan
-
Heavy duty 18 gauge galvanized housing
-
Available in 24″ – 50″ models
-
Smooth spun venturi to maximize airflow
-
Rugged X-frame motor mount for stability and quiet operation
-
Available with or without a performance boosting cone
-
Ships fully assembled except shutter and/or cone
-
3, 4, or 6 blade galvanized or 3 blade cast aluminum props
-
Two speed and variable speed motors available on select models (variable speed requires separate speed control)
Twister Exhaust Fan
-
Available in 12″, 16″, 20″ and 24″
-
Hinged rear guard allows for easy cleaning and maintenance by simply removing two bolts and swinging out the fan assembly
-
18 gauge galvanized butterfly shutter has adjustable, positive draft-free closure
-
Fan comes fully assembled for easy installation. Just cut your rough opening, attach to your structure, and wire
-
Direct drive motor
-
Heavy-duty motor mount / safety guard combination has an easy-to-clean coated finish
The Force Positive Pressure Fan
Mega Torque Fan 72" Fiberglass
Mega Torque Fan 72" VFD
-
Perfect for filtered facilities
-
Linear actuated, heavy-duty shutter
-
Premium-efficient JD-Drive motor
-
Provides soft starts
-
Enables variable speed
-
Allows for precise and uniform speed control
-
-
Rugged TurboProp provides increased performance and strength
-
Motor-centric frame with minimal air impedance
-
Maintenance-free
Magnum 58" Exhaust Fan
-
Up to 75% energy savings over traditional fans
-
42,652 CFM @.10” SP – best on the market
-
JD-Drive
-
Built in so no additional costs for separate units
-
Soft start for long life and efficiency
-
Variable speed ready
-
-
360° rubber sealed damper door
-
Save Time & Money
-
No Belts to Change
-
No Pulleys to Maintain
-
No Lubricating Bearings
-
No Greasing Motor
-
-
Maintains a continuous high level of performance with no power loss or reduction from aging belts and pulleys
-
FANtastic performance combined with great efficiency
-
Premium-efficient industrial motor
-
Comes with VFD (Variable Frequency Drive)
-
Pre-wired to motor and pre-set for easy installation
-
Soft starts fan to reduce loads on fan during start up and helps to extend fan life
-
NEMA 4x enclosure w/ cooling fins mounted in air flow to ensure low temperature during operation
-
Short wire length between motor and VFD to eliminate electrical noise and extend motor life
-
Pre-installed filters to eliminate interference with RFID readers and other electronics
-
UV resistant fiberglass housing and cone with smooth molded exterior
-
-
Smooth & QUIET operation
-
Innovative 5 blade aluminum propeller
-
Aluminum shutter
-
One-piece molded cone with heavy-duty galvanized guard
-
Heavy gauge stainless steel shutter clips
-
Drainage holes in the bottom of the housing to remove moisture
In-Out ES Shutter Fan with Cord
-
Available in 12”, 16”, 20” and 24”
-
Ships fully assembled out of the box
-
Outdoor rated UL507 certified motor
-
Smooth & quiet operation
-
High efficiency aluminum shutters with tie bar reduces shutter flapping and opening on windy days
Direct Drive Storm
-
JD-Drive – a permanent magnet, direct drive, premium and efficient motor with internal onboard driver
-
No maintenance! No belts, pulleys, bearings, tensioners nor greasing
-
Soft starts increases fan life
-
Surge protected
-
TurboProp – 3 poly composite blades
-
Aluminum or poly shutter
-
Fiberglass housing
-
UV resistant
ES Shutter Fan
55" Fiberglass Storm Torque
-
Available in 10″, 12″, 16″, 20″, 24″, and 30″
-
Smooth and quiet operation
-
Comes fully assembled out of the box
-
Models with cord have 3-prong plug and are pre-wired for 115 Volts. No electrician required!
-
High-efficiency aluminum shutters with tie bar to reduce shutter flapping and opening on windy days
-
Rugged aerodynamic fiberglass housing with heavy duty deep poly cone for superior performance
-
Smooth and quiet operation
-
High efficiency totally enclosed 2 HP motor
-
Drainage holes in housing to prevent water and ice buildup
-
VFD (Variable Frequency Drive) compatible and recommended for increased energy savings and longer life
-
Slanted to minimize moisture and debris collection
Tornado Fiberglass Exhaust Fan
-
Available in 12”, 16“, 20”, 24“, 36” and 50“
-
20″ – 36″ Gold Star Motor options.
-
Powerful, direct drive, IP66 rated Gold Star Motor that is dust tight and can be washed down from any angle
-
The Tornado with Gold Star Motor produces up to 33% more air flow
-
-
Rust-free, corrosion-free, molded fiberglass housing with gel coat for low maintenance
-
Slant wall housing for more efficient airflow
-
20-Year warranty on housing
Mega Storm II 72"
-
50,399 CFM @.05”SP high performance model available
-
2 high efficiency models which exceed 21 CFM/Watt
-
Improved triangle x-frame design for greater strength and durability
-
UV resistant smooth molded fiberglass housing
55" Storm Belt Drive Fiberglass Exhaust Fan
-
Rugged aerodynamic fiberglass housing with heavy duty deep poly cone for superior performance
-
High efficiency totally enclosed 1 HP, 1-1/2 HP and 2 HP motors
-
Drainage holes in housing to prevent water and ice buildup
Recirculation Fans
Permanent Magnet Direct Drive Panel Fans 50", 55", 60"
-
40,300 thrust CFM
-
No additional moving parts other than the motor for zero maintenance
-
Totally enclosed, IP65-rated, high-efficiency motor
-
Internal Motor Drive, provides soft starts, allows for precise and uniform speed control, enables variable speed with no VFD needed
-
Available in 50″, 55″, & 60″
-
Enhance your cooling power with the HPF Ring Kit
AirBlaster
Uni-Directional 3 Louver
Bi-Directional 4 Louver
-
Precision Velocity
-
3-Louvers – Unidirectional
-
4-Louvers – Bidirectional
-
41,265 thrust CFM
-
Decrease power usage by slowing fan down to increase thrust CFM/Watt
-
61.4 thrust CFM/Watt @ 50% speed
-
-
Easy-to-assemble & install
-
Precise & uniform speed control
-
Increase your cow comfort and cooling capabilities with the optional AirBlaster HPF Kit, available on the 3-louvered fan
Panel Fans 50", 55", 60"
-
Heavy-duty G90 galvanized 18-gauge venturi with gusset support X–frame provides superior strength and rigidity to minimize vibration compared to angle iron, square or round tube designs
-
Shaft bearings are eccentric locking, pre-lubricated, permanently sealed and rubber mounted for smooth operation and reduced blade fatigue, and are covered by a 3 Year Warranty.
-
Totally enclosed, maintenance-free, high-efficiency motors have completely sealed ball bearings, UL and CUL recognized, and are covered by a Two Year Warranty
Poly Stormer
-
Polyethylene housing will not rust or corrode
-
Galvanized G90 prop
-
Includes hot dip galvanized mounting bracket for versatile mounting options
Panel Fans 24" & 36"
-
36” belt drive models include a heavy-duty spring belt tensioner
-
24” models have a rigid guard motor mount
-
Shaft bearings are eccentric locking, pre-lubricated, permanently sealed and rubber mounted for smooth operation and reduced blade fatigue, and are covered by a 3 Year Warranty.
-
Totally enclosed, maintenance-free, high-efficiency motors have completely sealed ball bearings, are UL and CUL recognized, and are covered by a 2 Year Warranty.
-
Gold Star Motors are covered by a 3 Year Warranty.
Barnstormer
-
Available in 12”, 20”, 24”, and 36”
-
20″, 24″, and 36″ models can come with option Gold Star Motor!
-
Patented open front guard for easy maintenance (U.S. patent No.5,348,447)
-
Fan ships fully assembled
Poly Chiller
-
Available in 24” & 36”
-
One-piece molded black polyethylene housing WILL NOT RUST!
-
Fan ships fully assembled
Heavy Duty Industrial Basket Fan
-
2-speed non-oscillating and 3-speed oscillating high-efficiency motor models available with pull chain
-
Available in 20”, 24”, and 30
-
Optional wall or post mount brackets
-
Compatible with our misting/fogging product line
60" Premium Indoor/Outdoor Ceiling Fan
-
60″ Size
-
Switch on fan allows you to reverse operation for upward or downward airflow
-
Energy efficient 9,415 CFM of air movement using less energy than a 100 Watt light bulb
-
This indoor or outdoor ceiling fan is perfect for patios, screen porches, greenhouses, barns, and facilities that might experience harsh weather
Galvanized Portable Drum Fan
-
Galvanized Portable Drum Fans are available in 36″, 42″, & 48″
-
Heavy duty G90 galvanized steel housing
-
Rubber feet for reduced noise and stable operation
-
Ships completely assembled and ready for use
-
Compatible with our misting/fogging product line
-
Convenient cord wrap for storage and transportation
Replacement Parts
Conversion Kit
-
Features the JD-Drive, a permanent magnet, direct drive, maintenance-free motor with internal onboard driver
-
No VFD Needed!
-
TurboProp, an optimally pitched, superior poly prop for increased performance
-
Easy-to-follow instructions and drilling template
-
Enjoy the increased performance, energy efficiency, and a maintenance-free fan when you convert today!
JD Drive
-
NO VFD NEEDED!
-
Software-driven, intelligent, VARIABLE SPEED motor
-
IP-65 Rated
-
Surge Protected
-
Will not interfere with RFID
-
Works like cruise control – it adjusts to static pressures to stay at set speeds
-
Motor made in the U.S.A. with No Rare Earth Materials
-
Corrosion Resistant
Gold Star Motor
-
IP66! – Dust tight and Power Wash Compatible!
-
Aluminum finned housing for incredible heat dissipation
-
Shaft design allows for either flat or keyway
-
Progressive rotor design for higher efficiency and longer life
-
Multiple mounting options!
Replacement Poly Blades & Prop Assemblies
-
CW Poly Prop Assemblies
-
Individual CW Poly Blades
-
FRN & Poly Props
-
Shaft Collar
Replacement Props with Metal Fan Blade
-
Aluminum Blades
-
Galvanized Blades
-
Cast Aluminum Blades
-
Shaft Collar
Replacement Fan Motor
-
Belt-Drive Motors
-
Direct Drive Motors
-
Torque Drive Motors
Controls
Pulse Control Box
-
Run up to TWELVE separate rooms from just ONE control
-
REMOTE ACCESS
-
Outstanding flexibility and customization – 12 card slots come standard but get up to 36 slots by adding two slave modules with 12 card slots each
-
Integrated sensors detect when too much or too little power is used
-
Intelligent Control so each module can continue to operate even if the main processor stops
-
Livestock Tracker lets you maintain an accurate herd count without paper inventory cards
-
View historical data to make repairs, refine settings and SAVE $
-
Conforms to UL STDS 61010-1 and 61010-2-201
-
Certified to CSA STD C22.2 No. 61010-1
-
Two Limited Year Warranty
Pilot Climate Control
-
A complete solution for automating curtain, lighting, misters, and winter ventilation in your facility
-
Reduce energy consumption up to 70%!
-
Uniform airflow keeps stall surfaces and bed tops dry and air fresh
-
Easy to program and customize with a simple touch screen that allows easy customization for your specific facility
-
Start up to 100 HP of fans in unison with minimal current inrush
-
Lower peak demand by setting the maximum system power use
-
Complete Service Rated and UL listed service is part of every Pilot Climate control
-
Smooth start extends the life of all components
VFD Control Box
-
Use to vary speed to match needs based on application and to improve efficiency
-
Will not interfere with ear tags or other electronic devices that are susceptible to radio frequency interference due to its internal RF filter
-
Has signal isolator which allows a 0-10V or a 4-20 milliamp signal to be used to control or change the speed that the VFD is outputting to the motor
-
Starts fan slowly to extend the life of the fan
-
NEMA 4X enclosure with cooling fins to withstand the harshest environments
-
Extend Equipment Life and Reduce Maintenance
-
Reduce Energy Consumption and Energy Costs
Wall Mount Variable Speed Controls
-
Use for Shaded Pole, Permanent Split Capacitor (PSC), and Universal AD/DC motors
-
Built in ON/OFF AC line switch
-
Minimum speed trimpot
-
RFI noise suppression filter (provides RFI and EMI suppression)
-
Flame retardant ABS enclosure
-
All models mount in a standard 2” x 4” electrical wall box
-
UL/CUL listed (file# E51028), CSA certified (file#030837_0_000)